How-to

How To Clean Water From Your SmartPhone’s Speaker?

By Rahul Shukla

Posted on October 12, 2022

Have you ever dropped your phone and had water dripping from the speaker? If so, you might be curious about how to remove water from a phone speaker. There are various ways to do this, like using a hairdryer, a vacuum, or even the Sonic app.

Phone speakers frequently fill with water during the winter when everything is covered in ice and snow. This severely harms the electrical system within. Most people do not seriously heed this warning to save their phone speaker from water or heavy moisture. Even if you place a small amount of water inside most modern phones, they are still operational.

How To Remove and Eject Water From Your Phone’s Speaker?

You might ask how to remove water from a speaker if you have a phone. It will sound muted if it has been wet with water. But there is a workaround to remove water from phone speakers, you can download well-known Android apps, such as Super Speaker Cleaner. This app has an 80% success rate and can dry out phone speakers in just a few easy steps.

On the other hand, water can permanently harm your phone’s hardware if you haven’t employed this procedure. Water damage might result in more catastrophic issues if left unattended. If the water has already been removed, you might try submerging your phone in a dish of uncooked rice to eliminate any leftover moisture.

1. Cleaning The Water From The Phone Speaker With The Sonic App

Using the Sonic app to drain water from your phone’s speaker is an excellent choice if you’ve ever had a wet phone speaker & wanted to clean it up. It works by blasting the submerged water out of the phone’s speaker utilizing higher sound waves and powerful vibrations. The app is accessible from iTunes & Play Store and, thus, works with both iOS & Android devices. The app’s name may vary depending on the platform. However, the fundamental concept is the same.

Steps to use Sonic App to expel water from phone speaker

Go to Play store or AppStore from your Android or iPhone, respectively.

Search for Sonic App.

Install the App.

Add the password for the app. (Note: App is considered lightweight but keeps sufficient memory free for use.)

Enter the frequency, preferably a low frequency like 100Hz.

Play the sound.

Press stop and clean the speaker with a dry paper towel.

Play the sound again and gradually increase the volume to 80% of the maximum.

Stop the app, and clean your speaker grill with a dry paper towel.

Once cleaned, use the Sonic app periodically to expel moisture from your speaker.

Alternatively, if you are an iPhone user using Siri shortcuts, you can try Water Eject, which mimics the Apple Watch feature.

2. Removing Water From a Phone Speaker With a Hairdryer

Getting your phone speaker back in working order may be quick and simple by using a hair dryer to dry up the water inside. Water damage to a phone speaker typically results in distorted or muffled sounds. If the damage is severe, the device can be permanently damaged. Despite the possibility that you can download a fix for the problem from the app store, this approach is only useful if your phone is operational. CAUTION: you have to keep a close eye on the temperature of your phone while using it.

Place your phone in an upright position such that the speaker grill faces upwards.

Plug your hair dryer into the power socket.

Set the hairdryer to low heat.

Blow the hairdryer near the speaker grill from the back of the phone for 15 seconds.

Make sure you keep an eye on the temperature the phone is reaching.

place your finger on the heated area for 3 seconds. If not, let the device cool off.

Repeat the process for at least ten rounds to ensure the water is removed.

Once ten rounds are complete, wrap it in a dry paper towel or absorbent towel.

Keep it in a warm place to make sure that the towel absorbs all the water vapor.

After one hour, your phone is ready to be used.

CAUTION: you have to keep a close eye on the temperature of your phone while using it.

3. Removing Water Form Your Smartphone’s Speaker Using Other Methods

Water is frequently found in speakers, and these devices’ high-frequency sounds can make water try to get inside. You can try a few solutions if water has clogged your phone speaker.

Use of Rice

Utilizing rice to help absorb the water will probably result in complete water removal when left overnight. If the rice does not work, you can build a little sack out of cloth or even the brush from a vacuum cleaner to suck up the water. Make sure to play loud sounds to expel water from the system.

Use of Vacuum Cleaner

A vacuum cleaner is the most specific tool when cleaning a phone speaker. Any water or dust lodged in the speaker can be removed by connecting the hose to it and using the vacuum cleaner’s suction. Ensure the suction of the vacuum cleaner is low before you start to clean your phone’s speaker. In addition, before cleaning the speaker, be careful to unplug your headphones.

Use Your Phone Skins

If your phone’s speaker grill isn’t functioning properly, some android skins provide a feature that cleans out strange objects from it. This feature produces a high-frequency sound at maximum volume to clear the speaker grill of water, debris, dust, or other foreign things.

Check your phones for this option before attempting other methods in this article. Depending on your OEM, it may be referred to as Speaker Cleaner or Clear Speaker.

This function is known as Clear Speaker on smartphones that run the MiUI operating system.

Go to Settings > Additional Settings > Clear Speaker grills to clear the phone’s speaker grills.

You can still drain water from your speaker using the Phone Speaker Cleaner tool if your phone doesn’t have it. Playing audio from your music collection won’t set off any triggers.

Your phone’s sound system has sounds specifically made to purify water.

You can install an app for your phone that will clean the speaker and earpiece of any water. Many of these apps can be found on the Play Store & are fantastic.

These apps produce a loud vibrating sound that typically removes water resistance from your phone speaker, similar to the Speaker Cleaner feature on iPhones.

Sincerely, it might not always be effective to high-pitched blast noises through the phone speaker to evacuate water. The phone should be thoroughly dry before use.

You can leave the phones at room temperature for up to 24 hours to dry. The speaker of the phone should be facing downward.

Last Thoughts

The best way to get water away from the speakers is to take your phone apart and clear water out of the internals. Your phone’s sound system is made of flimsy plastic, so when it gets wet, it can’t hold fluids well and typically won’t last long. If it still isn’t working after applying all of the suggestions above, you should bring it to a service center, which can assist you in fixing it.